How to make this work: Any body face this problem then pcb first thorough cleaning with a nice clean gasoline, especially near the port and hot with Stan Lite 5 minutes to load and check your phone.If your problem even after removing parts brand red next picture above.
How to make this work: beautiful full pcb cleaning red mark next keyboard ic rehot then run the phone and see the result, placed If the keyboard problem ic again I hope you solve your problem.
How to make this work: first check volts on capacitor.if positive light not you see voltage on the capacitor and check the light IC replace any part of parts.If coil.damage voltage is 10v or more in the capacitor but problem then check forms of light.
How to make this work: If you ic light is not available, you can use this solution. If you want to repair nokia 1202 light problem making a bridge, you can remove the coil this.first a directed light ic and after that make pink and red deck.
How to make this work: Look at the picture is ways.If micro you have a problem nokia 12002 Micro phone.Replace microphone at the beginning and then check.if problem continues verify this.
How to make this work: This problem is very difficult to repair if it works on any damage carefully.if nokia 1202 network phone.then first to write a good pm and implementation result.If ui still see next rehot pa or replace pa.If available pa no problem then do the bridge.
How to make this work: If it does not check ringer.Then Profile nokia 1202 phone if then generally silent, active mode after reviewing his ringer.If see bell does not work, open the phone and check for damage speaker.If timbre speaker and replace the speaker speaker.If well but the problem remains then check ways to tone and timbre ic.
How to make this work: Step beautiful wash full pcb and hit with light standard 10 Midnight after opening the phone and see the results. If the problem persists, remove the pieces of red marks.
How to make this work: There is a red mark ic type ic.This switch ic just connect the speaker ear and strong phone call speaker.When with its normal mode after work when he heard that in the active mode of the high voice speaker then working. So when the speaker of the ear does not work, replace this ic.
How to make this work : It is very easy to repair, if your phone has this problem , first check online sim ways if you see something wrong while repairing flout.If see that well , but still warm and then re- issue or replace sim ic . If the solution is not complete then just do this jumper.If first solution does not work, you can try second solution.I hope your problem will be solved . 
How it works: If the first solution does not work , check the condenser condenser If you see red mark is short, then just replace the capacitor .
Copyright @ 2013 UserHelpBook.com . Privacy Policy | Terms and Conditions
