Nokia 500 Earpiece Speaker Problem Solution

Nokia 500 Earpiece Speaker Problem Solution
This solution covers the problem earpiece speaker Nokia 500 with a 3.2 inch TFT phone runs on Symbian Anna OS capacitive touch screen. If somehow when the speaker goes wrong and there is no indication of any audio you can hear through the speakerphone during a call when it's done . This sometimes occurs due to damage such as moisture or water, and any accidental damage that may cause the speaker to stop working .

This solution provides some simple tips on how to solve the problem, only takes a minute to scan and locate the parts of the speaker and all the connections in the circuit board as shown in the solution image .

Troubleshooting suggestions Headphones Nokia 500 President

A . Start checking support speaker is located on the top of the table behind the LCD screen.
Two . Check for possible accumulations of corrosion bending speaker terminal. Own buffers including speakers or upgraded although the connection may be low.
Three . Check speaker with a multimeter. Set the multimeter to X1 and check the sharp can be heard and answered tester. If there is any indication of something, the speaker is already burned or damaged. Replace it immediately .
April. If the speaker is good, and still no sound can be heard, check the firmware. Update or to re - flash .
May If the problem persists , possible failure is the ASIC GAZOO . The only solution to this is to return to work or replace it if necessary , and the need for good soldering skills to do.
Warning: If you do not have a lot of skills on how to return or install a chip BGA ball , let the experts. Trying to play this piece know the dead phone in no time .